Posts

OIF Announces Implementation Agreement for High Bandwidth Coherent Driver Modulator (HB-CDM) 2.0, Enabling Coherent Solutions to 800G and Above

New IA addresses the need for increased capacity and higher performance HB-CDM devices

Fremont, Calif.—July 28, 2021 – OIF, where the optical networking industry’s interoperability work gets done, today announced an Implementation Agreement (IA) for High Bandwidth Coherent Driver Modulator (HB-CDM) 2.0. This IA builds upon the HB-CDM 1.0 IA, released in November 2018, and leverages the same form factor.

The HB-CDM 2.0 follows the integrated laser and coherent receiver standards from OIF in enabling next-generation compact, high-performance coherent networking solutions. Since OIF’s HB-CDM 1.0 was released for 64 Gigabaud (GBd), enabling 400Gbps coherent systems, the market has seen a need for increased network capacity and higher performance. The HB-CDM 2.0 leverages the original Type 1 form factor for compatibility with existing systems and also includes a Flexible Printed Circuit (FPC) as an alternate interface and higher performance RF pitch options for extended rates for future systems.

“OIF’s HB-CDM 1.0 standard was a critical new component enabling optimized 400G+ metro and long-haul coherent networks, supporting the industry need for more capacity with a standardized footprint, interface and performance,” explained Technical Editor of the OIF HB-CDM 2.0 IA, Richard Ward, Intel. “The HB-CDM 2.0 is a natural extension covering 128GBd in coherent technology for 800G per wavelength and beyond coherent systems. The market demand reinforces OIF’s critical role in creating solutions to fulfill industry requirements and accelerating market adoption of optical networking technologies.”

About OIF

OIF is where the optical networking industry’s interoperability work gets done. Building on more than 20 years of effecting forward change in the industry, OIF represents the dynamic ecosystem of 120+ industry leading network operators, system vendors, component vendors and test equipment vendors collaborating to develop interoperable electrical, optical and control solutions that directly impact the industry’s ecosystem and facilitate global connectivity in the open network world. Connect with OIF at @OIForum, on LinkedIn and at http://www.oiforum.com.

 

PR Contact:

Leah Wilkinson

Wilkinson + Associates for OIF

Email: leah@wilkinson.associates

Office: 703-907-0010

 

OIF’s Optical Masterclass Series at NGON to Include Updates on 400ZR, Common Electrical I/O, Flex Ethernet & SDN Projects

Fremont, Calif.—May 8, 2019 – At NGON, May 21-23, 2019, OIF experts will kick off the Optical Masterclass Series with a comprehensive update on its 400ZR, Common Electrical I/O (CEI)-112, Flex Ethernet (FlexE) and Software Defined Networking (SDN) projects.

“OIF’s interoperability solutions are vital to the global network and with many of the key network operators in attendance, NGON is the ideal platform to provide updates on OIF’s work in 400ZR, CEI, FlexE and SDN,” said Dave Brown, Nokia and OIF Director of Communications.

The “Optical Masterclass Series – The Optical Internetworking Forum” session is being held Tuesday, May 21, 2019 from 09:00 – 11:00 (NEW TIME AS OF 5/16). Brown and Karl Gass, OIF Physical & Link Layer Working Group Vice Chair, Optical, will discuss how OIF is assuring interoperability in open, agile, next-generation optical networks and provide updates on crucial industry projects.

400ZR

OIF’s 400ZR project is critical in facilitating the reduction of cost and complexity for high bandwidth data center interconnects and promoting interoperability among optical module manufacturers. This Implementation Agreement (IA) will specify an interoperable digital coherent 400ZR interface targeted at short reach (80 km or more) DWDM amplified noise limited links and unamplified loss limited links.

CEI

The CEI project update will include discussion of the multiple 112 Gb/s interfaces being defined by OIF including CEI-112G MCM, XSR, VSR, MR and LR. Applications of these 112 Gb/s interfaces include die-to-die, die-to-OE (optical engine) on package, chip-to-module, chip-to-chip and chip-to-chip long reach over backplane and cables.

FlexE

OIF continues to lead in FlexE aggregation architectures through its newest FlexE 2.1 project for FlexE over 50GbE PHY applications, an extension to its FlexE 2.0 Implementation Agreement (IA). FlexE 2.1 will specify a 50G FlexE frame and multiplexing format and will address FlexE applications with lower bandwidth needs and provide an implementation foundation for applications including the access layer of the future 5G mobile network.

SDN

In November 2018, OIF announced the launch of “Requirements for Integrated Packet Optical SDN.” The project outlines requirements for a multi-layer SDN reference architecture as a use case for packet optical transport networks. It will generate functional requirements, a reference architecture and use cases for packet/optical networks guided by the vision to enable agile, open network solutions that simplify operations and optimize resource utilization.

IC-TROSA

The session will also include an update on the Integrated Coherent Transmit-Receive Optical Sub Assembly (IC-TROSA) project that defines a standard optical component containing a complete coherent modem. The availability of highly integrated components accelerates the adoption of coherent transmission into additional markets.

Additionally, Gass will participate in Wednesday’s Plenary session, 09:30 – 10:10, “Present View: To the terabit & beyond – practicalities for coherent transmission.” Also on Wednesday, from 14:35 – 15:30, Brown will speak on the “Open Source Approach: Looking at disaggregation as a pathway for multi-vendor cooperation, interoperability and driving enhanced network interfaces” panel.

Check the status of OIF’s current work here.

About OIF
Optical Internetworking Forum (OIF) is where the optical networking industry’s interoperability work gets done. Celebrating 20 years of effecting progressive change in the industry, OIF represents the dynamic ecosystem of 100+ industry leading network operators, system vendors, component vendors and test equipment vendors, all collaborating to develop interoperable electrical, optical and control solutions that directly impact the industry’s ecosystem and facilitate global connectivity in the open network world. Connect with OIF at @OIForum, on LinkedIn and at https://www.oiforum.com/.

 

PR Contact:
Leah Wilkinson
Wilkinson + Associates for OIF
Email: leah@wilkinson.associates
Office: 703-907-0010